Information
About Us
How To/Pro-Tips
Firearms Transfer Procedure
Shipping & Returns
Contact Us
Shopping Cart
0 items
 
   Home > Shop > Antique Military Firearms >

Scarce Springfield Armory Model 1903 Rifle c. 1913

Product Description

Scarce Springfield Armory Model 1903 Rifle c. 1913

Please check out my website at newmarketarms.com for this and other antique military firearms.

See Photos Here

This is a fine condition Springfield Armory Model 1903 Rifle in .30-06 that was manufactured in 1913.

The “U.S. / SPRINGFIELD / ARMORY / MODEL 1903.” stamp is in the correct and later sans serif style and is still crisply stamped. The serial number on the receiver is stamped in the correct and later sans serif style and the stampings are also still very crisp. The Receiver retains the majority of its original case-hardened finish on both the lower, protected areas and the top, exposed areas, which now exhibits a dark plum patina. There is no Hatcher Hole on the left side of the receiver so it was never altered for WWII service. The bottom of the receiver has numerous sub-inspection stamps.

The Trigger is the correct second type with the grooved face and knurled tip. The Trigger retains the vast majority of its finish with wear along the midpoint and this particular type of Trigger was used by Springfield beginning in 1910. The Sear is the early type with weep hole in the bottom. The Sear Pin retains considerable original blue finish on its face and on the body of the pin. The Sear Spring remains in the white.

The Magazine Cutoff is the correct and early first type with serif "OFF" and "ON" stamps and the rounded area where the cutoff switch is milled into the portion with the spindle hole. The cutoff on the “OFF” side retains a plum patina and it is correctly polished to the white on the “ON” side and it operates correctly. The Spindle retains the majority of its blued finish on the exposed end portion.

The Fixed Rear Sight Base is the correct solid type and it is correctly pinned at the bottom, front. The base retains the majority of its original blued finish on the bottom, protected side with the top portion now exhibiting a plum and pewter patina.

The Rear Sight is an original Springfield manufactured Model 1905 Adjustable Rear Sight with the correct .30-06 leaf graduations to 2,850 yards, which replaced the earlier .30-03 leaf graduations to 2450 yards in late 1906. The face of the leaf retains a pewter patina with clear delineations and numbers. The top of the Leaf has the volley fire notch. The back of the Leaf, at the top, has the correct half-round slide stop. The Drift Slide is the Second Type with the horizontal line that bisects the peep hole and without the vertical platinum line. The back of the drift slide has the sans serif “6” stamp, indicating the peep hole is 0.06” in diameter. The Slide is the third type and the Elevation Slide Binding Knob is the second type that is dished and knurled without the central groove running around the knurled portion. The binding knob retains the majority of its original blued finish. The Windage Knob is the correct second large diameter type that is also dished with knurls without the central groove. The windage knob retains most of the original blued finish. The slide correctly adjusts for windage and elevation. The Leaf Spring retains the majority of its original finish. The Rear Sight Base exhibits a pewter patina.

The Barrel is its original Springfield marked barrel with sans serif “SA” over the Ordnance Bomb stamp over the date “9-13”. About mid-length on the bottom of the barrel is the “D11” steel lot stamp. There is a “135” stamp on the bottom, rear of the barrel, just forward of the fixed rear sight base. The Barrel retains the vast majority of the original blued finish along the length in the protected areas with minor wear on the exposed portion. The bore is in very fine condition with a mirror finish and strong rifling.

The original Front Sight Base is present and is still secured tightly to the barrel. The base retains traces of its original blued finish which now exhibits a plum patina. The Front Sight Moveable Base retains most of its original blued finish that also exhibits a dark plum patina. The Front Sight Screw is slightly marred. The original Front Sight Blade retains the majority of its original blued finish and it correctly staked to the moveable base.

The Trigger Guard is the early and correct Third Type, which was milled. This guard has the sans serif “S” stamp on the bottom of the guard in the area covered by the floor plate. The Trigger Guard retains considerable original blue finish in the protected areas with normal operational wear exhibiting a muted plum patina on the bottom, exposed portions. Both original Trigger Guard Screws are present and both retain the majority of their original blued finish.

The Floor Plate is correctly milled and has the distinctive straight milling cut on the bottom and the more gradual slope at the front edge that was the standard at Springfield. See “United States Rifles and Machine Guns: Manufacturing the Springfield, 1903 Model Service Rifle,” by Ethan Viall Colvin, reprint of McGraw-Hill edition from 1917, page 173. The Floor Plate retains the vast majority of its original blued finish on the interior, protected surface with a very small “3” inspection stamp. The external side retains the majority of the original blued finish that exhibits a plum patina.

The Follower Spring is the correct type with rounded crimp/bend points and it retains considerable fire tempered finish. The Follower is the correct milled type that retains considerable blued finish on the top surface with wear on the top divider and on the right side ledge as well as on the front and rear ends. The bottom of the Follower retains the majority of its original blued finish with wear noted towards the back where the follower spring bend rests.

The Bolt is the correct and early Springfield Armory type with straight handle and small gas hole. The Bolt has the sans serif “B” steel lot number on the bottom of the safety lug. There is a sans serif “L” inspection stamp on the bottom of the bolt handle root. The Bolt retains 50% of its original blue finish that is showing wear along the friction points and sharp edges/high points with the balance a mixture of wear to the white and a pewter patina. The Extractor Collar is correctly milled and retains the majority of its original blued finish. The Bolt Handle and knob retain the majority of their original blued finish. The Left Locking Lug has the correct bolt stop detents on the bottom of the lug. The Extractor is the correct early type with the gas escape hole. The exterior surface retains considerable original blued finish with a small area of wear down to the white along the center. The interior surface retains considerable original blue finish that is starting to fade.

The Bolt Sleeve is the correct and early 3-position type and it retains most of its now faded blue finish with wear on the sharp edges. The Safety is the correct early Second Type with serif “READY” and “SAFE,” that exhibits a muted oil finish. There is correctly no hole in the top of the safety. The Safety Plunger and spring work correctly. The detent button on the left side of the bolt sleeve remains correctly in the white.

The Cocking Piece is the correct early type with three distinct rows of fine checkering and one partial row of checkering. The Cocking Piece is in fine condition and retains considerable original oil quenched finish on the barrel with the head exhibiting a dark plum patina. There are two milled rings on the neck of the Cocking Piece that contour smoothly towards the front. The Firing Pin Collar exhibits the majority of its original blue finish with wear on the top and bottom edges. The Firing Pin (or Striker) shows considerable original blue finish throughout. The Firing Pin Spring remains in the white with 36 coils.

The Stock is an excellent condition, scarce and beautiful, original Springfield Finger Groove Stock with single reinforcing bolts, which was added in 1908. The left side of the stock has rarely seen and original, rounded corner, sans serif “B.H.M.” cartouche, which is the final inspection cartouche of Springfield Inspector Burton H. Martin, who is known to have inspected 1903 rifles in 1913. In the magazine cutoff recess is a sans serif “E” stamp. The bottom of the stock wrist has the correct circle, script “P” firing proof stamp below a “32” stamp. The nose of the stock has the correct serif “S” stamp. There are numerous inspection stamps in the milled out interior of the stock. There is a serif “USWV” stamp on the left side of the butt adjacent to the butt plate. Further research may indicate what this stamp represents.

This stock retains its original oiler cutout in the butt and never received the later modification of an additional milled out spare parts recess cut. The original fine checkered butt plate, which was incorporated in 1910, is present. The exterior surface of the butt plate exhibits wear consistent with field use and it is now a plum patina although the tang still retains the majority of its now dulled blue finish. The interior surface of the butt plate retains the vast majority of its original blued finish. Both the convex, single slot tang screw and flat, single-slot plate screw, are present. The tang screw retains the majority of its original blue finish. The plate screw exhibits largely a pewter patina with areas of original bluing around the edge. The trap door is present and the original spring keeps the door closed securely.

The Stock has the milled Rear Sling Swivel Assembly, which retains considerable original blued finish with wear noted on the boss. Both lower sling swivel screws are present and both have unmarred slots. The Lower Band Spring retains the majority of its original blued finish. There are numerous minor dings and scratches noted but no cracks or chips are noted. This is a very beautiful and scarce stock.

The Handguard is a beautiful concave ramp type with the short sighting groove top and fixture slot on the bottom. This grooved top handguard was introduced in 1910 when the flat top handguard was discontinued. It correctly has the two handguard clips, both of which retain the majority of their original blued finish. It has the correct, large, rounded Windage Knob clearance cut. There are minor dings and small scratches on the handguard but no cracks or chips are noted.

The Lower Barrel Band is the correct milled type with the "U" stamp on the right side and it has the early, split shank on the Upper Sling Swivel. The Band and Sling Swivel now exhibits a mixed blue and plum patina. The Upper Band is the correct milled type introduced when the knife bayonet was approved in 1905 and it does have the sans serif "H" hardness stamp on the bottom of the bayonet lug, which began to appear until after 1906. The Band retains the majority of its original blued finish throughout that is thinning and now exhibits a plum patina. The Stacking Swivel has rounded ends or tips and is milled.

This is a scarce and beautiful Springfield Armory Model 1903 Service Rifle that was manufactured in 1913, the year before WWI began in Europe. Springfield only manufactured a little over 27,000 Model 1903 rifles in 1913. This rifle functions perfectly.

This rifle is C&R eligible and will come shipped in a new Plano rifle hard case. This rifle will also come with a historic writeup and a CD containing all of the photos in the listing. I accept Visa and MasterCard and charge NO FEES. Please let me know if you have any questions or if you would like additional photos posted.

 

Low Stock
$2,245.00
Quantity
Prices for internet orders only.
Not all products available in store.
Overall Customer Rating:
 Rate This Item
  |  Write a Review
Related Items
Rare Springfield Armory Model 1866 2nd Allin Trapdoor Rifle .50-70
Rare Springfield Armory Model 1866 2nd Allin Trapdoor Rifle .50-70
$2,445.00
Scarce Springfield Model 1870 .50-70 Trapdoor Rifle
Scarce Springfield Model 1870 .50-70 Trapdoor Rifle
$1,400.00
WWII Remington Rand Model 1911A1 c. 1945
WWII Remington Rand Model 1911A1 c. 1945
$2,445.00
Rare Springfield Armory Model 1903 with 1905 and 1906 Modifications
Rare Springfield Armory Model 1903 with 1905 and 1906 Modifications
$2,700.00
Scarce US Model 1841 Eli Whitney c. 1850 Unmodified
Scarce US Model 1841 Eli Whitney c. 1850 Unmodified
$2,245.00
Rare Remington Maynard Conversion Frankford Arsenal c. 1857
Rare Remington Maynard Conversion Frankford Arsenal c. 1857
$1,800.00



Copyright 2013 Outdoor Business Network | Powered by OBN | Privacy